2 years/ 120 European Credits Transfer Systems (ECTS), Diploma
The program’s language of instruction is Greek
Program’s purpose and objectives:
The general purpose of the Program of Study Mechanical Installation Technician (two years diploma) is to provide its candidates the required knowledge and experience to obtain a full-time position in the field of mechanical installations. The program will support its candidates to become gradually familiar with the disciplines of manufacturing, installation and maintenance of mechanical installations. Specifically, the program aims to provide the necessary scientific and practical background to its candidates in the areas of plumbing, heating ventilation and air-conditioning (HVAC) equipment, renewable energy technologies installers including small-scale biomass boilers and stoves, solar thermal systems, shallow geothermal systems and heat pumps, as well as installations in the field of lifting equipment. The program aims to bridge theory with practice, allowing the candidates to perform adequately their duties and understand the responsibilities in the field of the mechanical installation technician. The program will also provide its graduates the opportunity to continue their studies to acquire higher qualifications.
Intended learning outcomes:
The Curriculum of the Mechanical Installation Technician (two years diploma, System ECTS) provides to its candidates the following opportunities:
Required Courses
The student must successfully complete 52 ECTS, from the following list of modules:
No. | Code | Name | ECTS | Hours / week |
---|---|---|---|---|
1 | TEM101 | INTRODUCTION TO MACHINING PROCESSES (MATERIALS SCIENCE I) | 5 | 3+1 |
2 | TEM102 | INTRODUCTION TO MECHANICAL INSTALLATIONS | 5 | 3 |
3 | TEM103 | MATHEMATICS | 5 | 3 |
4 | TEM104 | TECHNICAL AND MECHANICAL DRAWING | 5 | 0+4 |
5 | TEM105 | ELECTROTECHNICS APPLICATIONS | 5 | 2+1 |
6 | TEM111 | HEALTH & SAFETY IN WORKSPACE | 2 | 2+2 |
7 | TEM112 | HYDRAULIC SYSTEMS Ι | 6 | 3+2 |
8 | TEM113 | COMPUTER APPLICATIONS | 2 | 0+2 |
9 | TEM114 | AIR-CONDITIONING SYSTEMS Ι | 6 | 3+2 |
10 | TEM115 | MACHINING TOOLS AND WELDING PROCESSES (MATERIALS SCIENCE II) | 5 | 1+3 |
11 | TEM201 | TECHNICAL ENGLISH AND TERMINOLOGY | 3 | 3 |
Specialization Courses
The student must successfully complete 54 ECTS, from the following list of modules:
No. | Code | Name | ECTS | Hours / week |
---|---|---|---|---|
1 | EGK202 | LIFTING EQUIPMENT AND LIFTS | 9 | 3+2 |
2 | EGK203 | HEATING SYSTEMS | 9 | 3+2 |
3 | EGK204 | RENEWABLE ENERGY SYSTEMS Ι | 9 | 3+2 |
Free Electives
The student must successfully complete 5 ECTS from courses that can be considered as free electives. A free elective is considered any course offered by another Department for which the student is eligible to register
Practical Training
The student must successfully complete 9 ECTS, from the following list of modules:
No. | Code | Name | ECTS | Hours / week |
---|---|---|---|---|
1 | TEM116 | INDUSTRY INTERNSHIP | 9 | 0 |
Required Courses
The student must successfully complete 52 ECTS, from the following list of modules:
No. | Code | Name | ECTS | Hours / week |
---|---|---|---|---|
1 | TEM101 | INTRODUCTION TO MACHINING PROCESSES (MATERIALS SCIENCE I) | 5 | 3+1 |
2 | TEM102 | INTRODUCTION TO MECHANICAL INSTALLATIONS | 5 | 3 |
3 | TEM103 | MATHEMATICS | 5 | 3 |
4 | TEM104 | TECHNICAL AND MECHANICAL DRAWING | 5 | 0+4 |
5 | TEM105 | ELECTROTECHNICS APPLICATIONS | 5 | 2+1 |
6 | TEM111 | HEALTH & SAFETY IN WORKSPACE | 2 | 2+2 |
7 | TEM112 | HYDRAULIC SYSTEMS Ι | 6 | 3+2 |
8 | TEM113 | COMPUTER APPLICATIONS | 2 | 0+2 |
9 | TEM114 | AIR-CONDITIONING SYSTEMS Ι | 6 | 3+2 |
10 | TEM115 | MACHINING TOOLS AND WELDING PROCESSES (MATERIALS SCIENCE II) | 5 | 1+3 |
11 | TEM201 | TECHNICAL ENGLISH AND TERMINOLOGY | 3 | 3 |
Specialization Courses
The student must successfully complete 54 ECTS, from the following list of modules:
No. | Code | Name | ECTS | Hours / week |
---|---|---|---|---|
1 | SYG202 | MACHINING PROCESSES FOR MATERIAL DISPOSAL (LATHE – MILLING MACHINE) | 9 | 0+5 |
2 | SYG203 | WELDING OF MATERIALS WITH MMA | 9 | 0+5 |
3 | SYG204 | ADVANCED APPLICATIONS OF MMA (ADVANCED APPLICATIONS OF WELDING PROCESSES Ι) | 9 | 1+4 |
Free Electives
The student must successfully complete 5 ECTS from courses that can be considered as free electives. A free elective is considered any course offered by another Department for which the student is eligible to register
Practical Training
The student must successfully complete 9 ECTS, from the following list of modules:
No. | Code | Name | ECTS | Hours / week |
---|---|---|---|---|
1 | TEM116 | INDUSTRY INTERNSHIP | 9 | 0 |